Publications et Thèses

Publications (depuis 2011)

2019

  1. NIEL D., CHANGENET C., VILLE F., OCTRUE M.: « Thermomecanical study of high speed rolling element bearing: a simplified approach”. IMechE, Part J, Journal of Engineering Tribology, vol. 233, issue 4, pp. 541-552
  2. VAUDREY A.: “Thermodynamics of indirect water injection in internal combustion engines: Analysis of the fresh mixture cooling effect”. IMechE, International Journal of Engine Research, vol. 20, issue 5, pp. 527-539
  3. CANDELIER K., ATLI A., ALTEYRAC J.: “Termite and decay resistance of bioplast-spruce green wood-plastic composites”. European Journal of Wood and Wood Products, vol. 77, issue 1, pp. 157-169
  4. RUZEK M., VILLE F., VELEX P., BONI J.B., MARCHESSE Y.: « On windage losses in high-speed pinion-gear pairs”. Mechanism and Machine Theory, vol. 132, pp. 123-132
  5. NIEL D., CHANGENET C., VILLE F., OCTRUE M.: « A new test rig to study rolling element bearing thermomechanical behavior”. Power Transmission Engineering, vol. 13, n°3, pp. 50-55
  6. MARCHESSE Y., CHANGENET C., VILLE F.: « Drag power loss investigation in cylindrical roller bearings using CFD approach”. Tribology Transactions, vol. 62, n°3, pp. 403-411
  7. CADIOU F., ETIEMBLE A., DOUILLARD T., WILLOT F., VALENTIN O., BADOT J.C., LESTRIEZ B., MAIRE E.: « Numerical Prediction of Multiscale Electronic Conductivity of Lithium-Ion Battery Positive Electrodes”. Journal of The Electrochemical Society, vol.166, n°8, pp. 1692-1703
  8. CARETTE L., JACQUET P., COTTON D., VIGNAL V., FAURE S.: « TaC/Ta2C bilayer formed on carburized and annealed tantalum; development of a numerical growth model”. Applied Surface Science, vol. 467-468, pp. 84-88
  9. GOLABCZAK M., MAKSIM P., JACQUET P., GOLABCZAK A., WOZNIAK K., NOUVEAU C.: “Investigations of geometrical structure and morphology of samples made of hard machinable materials after Wire Electrical Discharge Machining (WEDM) and vibro-abrasive finishing”. Material Science and Engineering Technology, vol. 50, issue 5, pp. 611-615
  10. ENGOZOGHO ANRIS S.P., BIKORO BI ATHOMO A., VIDAL M., DENAUD L., SAFOU TCHIAMA R., CHARRIER B.: “Extraction and Characterization of Aucoumea klaineana Pierre (Okoume) Extractives”. Journal of Renewable Materials, vol.7, n°6, pp. 517-522
  11. KONE C., MARCHESSE Y., PANNETON R.: « Numerical Approach for Possible Identification of the Noisiest Zones on the Surface of a Centrifugal Fan Blade”. Openfoam Selected Papers of the 11th Workshop, Springer International Edition, pp. 341-355.
  12. MESSAOUDENE Z.: “Lean thinking as a learning strategy at the service of global development”. Lean Engineering for Global Development, Springer International Publishing, 403p. (pp. 33-60)
  13. BESNARD A., ARDIGO M.R., IMHOFF L., JACQUET P.: “Curvature Radius Measurement by Optical Profiler and Determination of the Internal Stress”. Applied Surface Science, vol. 487, pp. 356-361
  14. NICOLI C., CARTON J.F., VAUCHERET A., JACQUET P.: « Caractérisation de la propreté inclusionnaire d’aciers de fonderie par analyse d’images en Microscopie Electronique à Balayage ». Metallurgical Research & Technology, vol. 116, n°5, 7p.
  15. BONI J.B., CHANGENET C., VILLE F.: « A model for predicting churning losses in planetary gears”. Power Transmission Engineering, vol. 13, n°6, pp. 59-63
  16. RUZEK M., MARCHESSE Y., VILLE F., VELEX P.: “Windage power loss reductions in high-speed gear pairs”. Forschung im Ingenieurwesen, vol. 83, Issue 3, pp. 387-392
  17. BOSSY E., NOYEL J.P., KLEBER X., VILLE F., SIDOROFF C., SIMON T.: “Competition between surface and subsurface rolling contact fatigue failures of nitrided parts: a Dang Van approach”. Tribology International, vol. 140, 105888, pp. 1-8
  18. VOUAILLAT G., NOYEL J.P., VILLE F., KLEBER X., RATHERY S.: “From Hertzian contact to spur gears: analyses of stresses and rolling contact fatigue”. Mechanics & Industry, vol. 20, n°6, 16p.

2018

  1. BENALLOUCH M., OUTBIB R., BOUTAYEB M., LAROCHE E.: “Robust Observers for a Class of Nonlinear Systems Using PEM Fuel Cells as a Simulated Case Study”. IEEE Transactions on Control Systems Technology, vol. 26, n°1, pp. 291-298
  2. TOURET T., CHANGENET C., VILLE F., LALMI M., BECQUERELLE S.: « On the use of temperature for online condition monitoring of geared systems – A review”. Mechanical Systems and Signal Processing, vol.101, pp.197-210
  3. LANZETTA F., VAUDREY A., BAUCOUR P.: « A new method to optimise finite dimensions thermodynamic models: application to an irreversible Strirling engine”. International Journal of Ambient Energy, vol.39, issue 4, pp.392-405
  4. LEMAIRE E., AYELA C., ATLI A.: « Eco-friendly materials for large area Piezoelectronics: self-oriented Rochelle salt in wood”. Smart Materials and Structures, vol.27 (2), 15p.
  5. FOSSIER C., CHANGENET C., VILLE F., BARDAY D., BERIER V.: « Investigations on drive axle thermal behaviour: power loss and heat transfer estimations”. SAE International Journal of Engines, vol.11 (1), 12p.
  6. MENUT M., BOUSSEL L., ESCRIVA X., BOU-SAID B., WALTER-LE-BERRE H., MARCHESSE Y., MILLON A., DELLA-SCHIAVA N., LERMUSIAUX P., TICHY J.: « Comparison between a generalized Newtonian model and a network-type multiscale model for hemodynamic behavior in the aortic arch: Validation with 4D MRI data for a case study”. Journal of Biomechanics, vol.73, pp.119-126
  7. GOLABCZAK M., SWIECIK, GOLABCZAK A., NOUVEAU C., JACQUET P., BLANC C.: « Investigations of surface layer temperature and morphology of hard machinable materials used in aircraft industry during abrasive electrodischarge grinding (AEDG) process”. Materials Science & Engineering Technology, vol. 49, Issue 5, pp. 568-576
  8. NGUYEN T.P., LEMAIRE E., EUPHRASIE S., THIERY L., TEYSSIEUX D., BRIAND D., VAIRAC P.: « Microfabricated high temperature sensing platform dedicated to scanning thermal microscopy (SThM)”. Sensors and Actuators A: Physical, vol. 275, pp. 109-118
  9. ATLI A., CANDELIER K., ALTEYRAC J.: “Mechanical, thermal and biodegradable properties of bioplast-spruce green wood polymer composites”. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, vol. 12, n°5, pp. 231-243
  10. ISAAC G., CHANGENET C., VILLE F., CAVORET J., BECQUERELLE S.: « Thermal analysis of twin-disc machine for traction tests and scuffing experiments”. IMechE, Part J, Journal of Engineering Tribology, vol. 232, issue 12, pp. 1548-1560
  11. MESSAOUDENE Z.: “Paradoxes and organizational learning in continuous improvement approaches: using the TRIZ principles for developing problem solving performance in a Michelin plant”. Automated Invention for Smart Industries, Springer International Publishing, pp. 40-51

2017

  1. ATLI A., SIMON S., CADETE SANTOS AIRES F.J. CARDENAS L., EHRET E., LOURDIN P.: « A new strategy to activate liquid crystal polymer samples for electroless copper deposition ». Journal of Applied Polymer Science, vol. 134, Issue 1: 44397, 12p.
  2. NEUROUTH A., CHANGENET C., VILLE F., OCTRUE M.: « Influence of rolling element bearing modeling on the predicted thermal behavior of the FZG test rig”. Tribology Transactions, vol.60, Issue 4, pp. 753-761
  3. COTTON D., JACQUET P., FAURE S., VIGNAL V.: « Epitaxial growth of tantalum carbides by lowcarbon flow carburizing”. Materials Chemistry and Physics, vol.192, pp. 170-180
  4. MESSAOUDENE Z., CHIRINOS-COLMENARES O., DUC F.: « La pérennisation des démarches d’amélioration continue ». JITEC, N°204, pp. I-VIII
  5. MESSAOUDENE Z.: « Application of Lean education in ECAM Lyon for development lean management training”. Lean education: an overview of current issues, Springer International Publishing, pp. 85-98
  6. NEUROUTH A., CHANGENET C., VILLE F., OCTRUE M., TINGUY E.: “Experimental investigations to use splash lubrication for high-speed gears”. ASME Journal of Tribology, vol.139 (6), 061104, 7p.
  7. LARUELLE S., FOSSIER C., CHANGENET C., VILLE F., KOECHLIN S.: « Experimental investigations and analysis on churning losses of splash lubricated spiral bevel gears”. Mechanics & Industry, vol.18 (4), 412, 10p.
  8. KONE T.C., MARCHESSE Y., PANNETON R.: « A Numerical Approach to Possible Identification of the Noisiest Zones of a Wall Surface with a Flow Interaction”. Open Journal of Fluid Dynamics, vol.7 (4), pp. 525-545
  9. BONI J.B., NEUROUTH A., CHANGENET C., VILLE F.: “Experimental investigations on churning power losses generated in a planetary gear set”. Bulletin of the JSME, Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol.11, n°6, 12p.
  10. VAUCHERET A., NICOLI C., CARTON J.F., JACQUET P.: « Influence of Process Parameters on Ceroxide Formation in Low-Carbon Steels ». Journal of Casting & Materials Engineering, vol.1, n°4, pp.90-96
  11. NICOLI C., VAUCHERET A., CARTON J.F., JACQUET P.: « Relationship between inclusion population and deoxidation process in low carbon steels”. Journal of Casting & Materials Engineering, vol.1, n°4, pp.97-102

2016

  1. VOELTZEL N., MARCHESSE Y., CHANGENET C., VILLE F., VELEX P.: « On the influence of helix angle and face width on gear windage losses”. Proc. IMechE, Part C, Journal of Mechanical Engineering Science, Vol.230, No. 7-8, pp. 1101-1112
  2. CHANGENET C., VILLE F., VELEX P.: « Thermal behavior of a high-speed gear unit”. Gear Technology, Vol. 33, No. 1, pp. 38-41
  3. BENALLOUCH M., CHANGENET C., CHARVET J.N., VAUDREY A., SICARD F.: “Pompes à chaleur – Les apports de la commande prédictive ». Revue Générale du Froid & du conditionnement d’air, n°1156, pp. 16-22
  4. NOYEL J.P., VILLE F., JACQUET P., GRAVOUIL A., CHANGENET C.: « Development of a granular cohesive model for rolling contact fatigue analysis: crystal anisotropy modeling”. Tribology Transactions, Vol. 59, No. 3, pp. 469-479
  5. SIAD A., BESNARD A., NOUVEAU C., JACQUET P.: « Critical angles in DC magnetron glad thin films ». Vacuum, vol. 131, pp. 305-311

Avant 2016

  1. MARCHESSE Y., CHANGENET C., VILLE F., VELEX P.:
    “Investigations on CFD simulations for predicting windage power losses in spur gears”. ASME Journal of Mechanical Design vol.133 (2), 2011, pp. 024501-1/024501-7.
  2. LEPRINCE G., CHANGENET C., VILLE F., VELEX P., DUFAU C., JARNIAS F.:
    “Influence of aerated lubricants on gear churning losses – an engineering model”. Tribology Transactions, vol. 54 (6), 2011, pp. 929-938.
  3. CHANGENET C., LEPRINCE G., VILLE F., VELEX P.:
    “A note on flow regimes and churning loss modeling”. ASME Journal of Mechanical Design, vol.133 (12), 2011, pp. 121009-1/121009-
  4.  DURAND de GEVIGNEY J., CHANGENET C., VILLE F.,
    VELEX P.:
    “Thermal modelling of a back-to-back gearbox test machine: Application to the FZG test rig”. IMechE, Part J, Journal of Engineering Tribology, vol.226 (6), 2012, pp. 501-515.
  5. MATTERA J.P., GLISES R., BAUCOUR P., VAUDREY A., VERSCHELDE S., CHAMAGNE D.: “Electrothermal modelling of the railroads catenaries”. IET Electrical Systems in Transportation, vol. 2 (3), 2012, pp.110-118.
  6. MOINARD-CHECOT D., RIGOLLET C., LOURDIN P.:
    “Powder injection moulding PIM of feedstock based on hydrosoluble binder and submicronic powder to manufacture parts having micro-details”. Powder Technology vol.208 (2), 2011, pp. 472-479.
  7. JACQUET P., COUDERT J.B., LOURDIN P.:
    “How different steel grades react to a salt bath nitrocarburizing and post-oxidation process: influence of alloying elements”. Surface&Coatings Technology vol.205 (16), 2011, pp. 4064-4067.
  8. MOINARD D.:
    “Le procédé PIM : une combinaison innovante entre métallurgie des poudres et injection plastique”. Traitements & Matériaux, n°412, 2011, pp. 26-31.
  9. CIESLIK J., JACQUET P., FLECHE D.:
    “Amélioration de la durée de vie d’outils de coupe pour l’usinage du bois à l’aide de la nitruration”. Traitements & Matériaux, n°412, 2011, pp. 44-48.
  10. MULIN H., JACQUET P., LAMBERTIN M., MOINARD-CHECOT D., BIHR J.C.:
    “Contribution to the development of 18 carat gold alloy shaped by MIM”. Powder Injection Moulding International vol.5 (2), 2011, pp. 66-70.
  11. CIESLIK J., JACQUET P., TLILI B., MULIN H.:
    “Decrease of compound layer thickness obtained in plasma nitriding of alloyed steels by diffusion stage”. Journal of Materials Science and Engineering, vol. 1 (7A), 2011, pp. 974-980.
  12. GOLABCZAK M., PAWLAK W., SZYMANSKI W., JACQUET P., FLITI R.: “Properties of PVD coatings manufactured on X38CrMoV5-1 steel for plastic moulding applications”. Non-conventional machining processes, Journal of Machine Engineering, vol. 12 (2), 2012, pp. 37-45.
  13.  GOLABCZAK M., JACQUET P.:
    “Thickness evaluation of the carbon coatings manufactured on magnesium alloys using optical profiler”. Non-conventional machining processes, Journal of Machine Engineering, vol. 12 (2), 2012, pp. 29-36.
  14.  JACQUET P., GOLABCZAK M., LOURDIN P.:
    “Experimental characterizations of non-seizing solutions for plastic moulding tools”. Applied Surface Science, vol. 261, 2012, pp. 824-829.
  15. GOLABCZAK M., JACQUET P., NOUVEAU C., FLITI R.:
    “Tribological investigations of TiC+a-C:H coatings manufactured on X38CrMoV5-1 steel using PVD technology”. Defect and Diffusion Forum, vol.334-335, 2013, pp. 97-104.
  16. GOLABCZAK M., JACQUET P., NOUVEAU C., FLITI R.:
    “Low friction MoS2TiW coatings manufactured on X38CrMoV5-1 steel using PVD method”. Materialwissenschaft und Werktofftechnik, vol.44 (5), 2013, pp. 395-402.
  17. JACQUET P., MARRAY T., FABRE A., PEREZ G., MOINARD D.:
    “Determination of carbon and nitrogen profile after a low pressure carbonitriding treatment”. Polish ceramic bulletin, vol.115, 2013, pp. 287-294.
  18. GOLABCZAK M., GOLABCZAK A., KONSTANTYNOWICZ A., JACQUET P.:
    “Cellular automata for modelling growth of the carbon-like layers with using ideas of surface thermodynamics”. Wulfenia journal, vol.20, n°3, 2013, pp. 2
  19. BELIARDOUH N.E., NOUVEAU C., WALOCK M.J., JACQUET P.:
    « A study of the wear performance of duplex treated commercial low-alloy steel against alumina and WC balls”. Surface and Coatings Technology, vol.259, Part C, 2014, pp. 483-494.
  20. MARRAY T., JACQUET P., MANSORI M., FABRE A., BARRALLIER L.:
    « A thermodynamic and experimental study of low-alloy steels after carbonitriding in a low-pressure atmosphere”. Metal Science and Heat Treatment, vol.56, Issue 7-8, 2014, pp. 434-439.
  21. NOYEL J.P., JACQUET P., VILLE F., GRAVOUIL A., CHANGENET C.:
    « Modèle mésoscopique de la durée de vie en régime de fatigue de contact de roulement ». Annales de Chimie – Science des Matériaux, vol. 39, no. 3-4, 2015, pp. 193-200.
  22. SIAD A., NOUVEAU C., BESNARD A., JACQUET P., QUESADA J.:
    « Etude d’un traitement duplex sur le comportement tribologique ». Annales de Chimie – Science des Matériaux, vol. 39, no. 3-4, 2015, pp. 201-208.
  23. NOYEL J.P., VILLE F., JACQUET P., GRAVOUIL A., CHANGENET C.:
    « Development of a granular cohesive model for rolling contact fatigue analysis: crystal anisotropy modeling”. Tribology Transactions, vol. 59, no. 3, 2016, pp. 469-479.
  24. SIAD A., BESNARD A., NOUVEAU C., JACQUET P.: « Critical angles in DC magnetron glad thin films« .Vacuum, vol. 131, 2016, pp. 305-31
  25. VAUDREY A., BAUCOUR P., LANZETTA F., GLISES R.:
    “Detailed analysis of an endoreversible fuel cell: maximum power and optimal operating temperature determination”. Frontiers in Heat and Mass Transfer, vol. 3 (3), 2012, 033001-8p.
  26. BACHMAN J., CHARVET M., SANTAMARIA A., TANG H.Y., PARK J.W., WALKER R.:
    “Experimental investigation of the effect of channel length on performance and water accumulation in a PEMFC parallel flow field”. International Journal of Hydrogen Energy, vol. 37 (22), 2012, pp. 17172-17179.
  27. LEPRINCE G., CHANGENET C., VILLE F., VELEX P.:
    “Investigations on oil flow rates projected on the casing walls by splashed lubricated gears”. Advances in Tribology, vol. 2012, article ID 365414, 2012, 7p.
  28. PALLAS S., MARCHESSE Y., CHANGENET C., VILLE F., VELEX P.:
    “A windage power loss model based on CFD study about volumetric flow rate expelled by spur gears”. Mechanics & Industry, vol.13 (5), 2012, pp. 317-323.
  29. REGUILLET V., VAUDREY A., MOUTIN S., MONTAUT A., FRANCOIS X., BAUCOUR P., GLISES R.: “Definition of efficiency criteria for a fuel cell humidifier: application to a low power proton exchange membrane fuel cell system for negative surrounding temperatures”. Applied Thermal Engineering, vol.58, 2013, pp. 382-393.
  30. DURAND de GEVIGNEY J., VILLE F., CHANGENET C., VELEX P.:
    “Tooth friction losses in internal gear: analytical formulation and application to planetary gears”. IMechE, Part J, Journal of Engineering Tribology, vol.227 (5), 2013, pp. 476-485.
  31. PALLAS S., MARCHESSE Y., CHANGENET C., VILLE F., VELEX P.:
    “Application and validation of a simplified numerical approach for the estimation of windage power losses in spur gears”. Computers & Fluids, vol.84, 2013, pp. 39-45.
  32. MARCHESSE Y., CHANGENET C., VILLE F.:
    « Numerical investigations on drag coefficient of balls in rolling element bearing ». Tribology Transactions, vol.57 (5), 2014, pp. 778-785.
  33.  NEUROUTH A., CHANGENET C., VILLE F., ARNAUDON A.:
    « Thermal modeling of a grease lubricated thrust ball bearing »
    . IMechE, Part J, Journal of Engineering Tribology, vol.228 (11), 2014, pp. 1266-1275.
  34. VAUDREY A., LANZETTA F., FEIDT M.:
    « H.B. Reitlinger and the origins of the efficiency at maximum power formula for heat engines”. Journal of Non-Equilibrium Thermodynamics, vol.39, Issue 4, 2014, pp. 199-203.
  35. NEUROUTH A., CHANGENET C., VILLE F., VELEX P., OCTRUE M.:
    “Is splash lubrication compatible with efficient gear units for high-speed applications?”. Power Transmission Engineering, vol. 9, no. 7, 2015, pp. 48-52.
  36. TOURET T., CHANGENET C., VILLE F., CAVORET J., ABOUSLEIMAN V. : « Experimental investigations on the effect of micropitting on friction – Part 1 ». Tribology International.
  37. QUIBAN R., CHANGENET C., MARCHESSE Y., VILLE F., BELMONTE J. : « Churning losses of spiral bevel gears at high rotational speed ». IMechE, Part J, Journal of Engineering Tribology.
Thèses soutenues depuis 2008
Thèses en cours